Commands listed in alphabetical order
TRIGger:{A|B
}:BUS:B<x>:AUDio:DATa:HIVALue
This command sets the upper word value to be used when triggering on
an audio bus signal. The trigger condition must b e set to DATA using
TRIGger:{A|
B}:BUS:B<x>:AUDio:CONDition.
The bus number is specified by <x>.
Conditions
Requires the SR-AUDIO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:AUD io:DATa:HIVALue <QString>
TRIGger:{A|B}:BUS:B<x>:AUD io:DATa:HIVALue?
Arguments
<QString> is the upper word value to be used when triggering on an audio bus
signal.
Examples
TRIGger:A:BUS:B1:AUDio:DAT a:HIVALue "11001101" sets the hi value to
XXXXXXXXXXXXXXXX11001101.
TRIGger:A:BUS:B1:AUDio:DATa:HIVALue? might
return :TRIGGER:A:BUS:B1:AUDIO:DATA:HIVALUE
"XXXXXXXXXXXX XXXXXXXXXXXX" indicating the hi value is set to
XXXXXXXXXXXXXXXXXXXXXXXX.
TRIGger:{A|B}:BUS:B<x>:AUDio:DATa:OFFSet
This command sets the data offset value to be used when triggering on
an audio bus signal. The trigger condition must be set to DATa using
TRIGger:{A|B}:BUS:B<x>:AUDio:CONDition.
The bus number is specified by <x>.
Conditions
Requires the SR-AUDIO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:AUD io:DATa:OFFSet <NR1>
TRIGger:{A|B}:BUS:B<x>:AUD io:DATa:OFFSet?
MSO54, MSO56, MSO58, MSO58LP Programmer 2-767
To Next Page
Loading...
Need help?
General
