Commands listed in alphabetical order
POWer:POWer<
x>:REFLevels:PERCent:TYPE
This command sets or queries the reference levels for the specified power
measurement badge. The power m easurement badge is specified by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group
Power
Syntax
POWer:POWer<x>:REFLevels:P ERCent:TYPE {TENNinety | TWENtyeighty
| CUSTom}
POWer:POWer<x>:REFLevels:P ERCent:TYPE?
Related Commands
POWer:POWer<x>:REFLevels:METHod, POWer:POWer<x>:REFLevels:
PERCent:FALLHigh, POWer:POWer<x>:REFLevels:PERCent:FAL LLow,
POWer:POWer
<x>:REFLevels:PERCent:FALLMid, POWer:POWer<x>:
REFLevels:PERCent:RISEHigh, POWer:POWer<x>:REFLevels:PERCent:
RISELow, POWer:POWer<x>:REFLevels:PERCent:RISEMid,
Arguments
TENNinety to set the low reference levels as 10% and high reference levels as
90%
TWENtyeighty to set the low reference levels as 20% and high reference levels
as 80%
CUSTom to set the custom low, high, and mid reference levels for rising and
falling edges
Examples
POWer:POWer1:REFLevels:PER Cent:TYPE TENNinety sets the low
reference levels as 10% and high reference levels as 90% for the power
measurement badge 1.
POWer:POWer<x>:RESUlts:ALLAcqs:MAXimum? (Query Only)
This command queries the maximum value of all acquisitions for the measurement
parameter in the specified power m easurement badge. The power measurement
badge is specified by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group
Power
MSO54, MSO56, MSO58, MSO58LP Programmer 2-561
To Next Page
Loading...
Need help?
General
