Commands listed in alphabetical order
Group
Bus
Syntax
BUS:B<x>:LIN:SOUrce:THResh old <NR3>
BUS:B<x>:LIN:SOUrce:THResh old?
Arguments
<NR3> the LIN source threshold for the specified bus.
Examples
BUS:B1:LIN:SOUrce:THReshol d 50.0e-3 sets the threshold to 50 mV.
BUS:B1:LIN:SOUrce:THReshol d? might return
:BUS:B1:LIN:SOURCE:THRESHO LD 0.0E+0 indicating t he threshold is 0.0 V.
BUS:B<x>:LIN:STANDard
This command sets or queries the LIN bus standard for the specified bus. The
bus number is specified by x.
Conditions
Requires option SR-AUTO.
Group
Bus
Syntax
BUS:B<x>:LIN:STANDard {MIXed|V1X|V2 X}
BUS:B<x>:LIN:STANDard?
Arguments
MIXed specifies both versions 1.x and 2.x of the LIN standard.
V1X spec ifies the version 1.x of the LIN standard.
V2X spec ifies the version 2.x of the LIN standard.
Examples
BUS:B1:LIN:STANDard V1X sets the standard to version 1.x.
BUS:B1:LIN:STANDard? might return :BUS:B1:LIN:STANDARD V2X,
indicating the standard is set to version 2.x.
BUS:B<x>:MIL1553B:LOWTHRESHold
This command sets or queries the MIL-STD-1553 lower threshold for the
specified bus. The bus is specified by x.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-155
To Next Page
Loading...
Need help?
General
