Tektronix MSO56 User Manual

Commands listed in alphabetical order
DISplay:WAVE
View<x>:CURSor:CURSOR<x>:VBArs:APOSition
This command sets or queries the cursor A horizontal position of the specified
cursor in the specified waveview.
NOTE.
WAVEV
iew<x>
is the specified waveview and must be WAVEView1 .
Cursor<x> is the specified cursor and must be CURSOR1 .
Group
Cursor
Syntax
DISplay:WAVEView<x>:CURSo r:CURSOR<x>:VBArs:APOSition <NR3>
DISplay:WAVEView<x>:CURSo r:CURSOR<x>:VBArs:APOSition?
Arguments
<NR3> is the horizontal cursor A position of the specified cursor in the specified
waveview.
Examples
DISplay:WAVEView1:CURSor: CURSOR1:VBArs:APOSition - 4.0e-6 set
the cursor position to 4.0 μs.
DISplay:WAVEView1:CURSor: CURSOR1:VBArs:APOSition? might return
:DISPLAY:WAVEVIEW1:CURSOR :CURSOR1:VBARS:APOSITION -5.0E-6
indicating the cursor A position is -5.0 μs.
DISplay:WAVEView<x>:CURSor:CURSOR<x>:VBArs:BPOSition
This command sets or queries the cursor B horizontal position of the specified
cursor in the specified waveview.
NOTE.
WAVEView<x> is the specified waveview and must be WAVEView1 .
Cursor<x> is the specified cursor and must be CURSOR1 .
Group
Cursor
Syntax
DISplay:WAVEView<x>:CURSo r:CURSOR<x>:VBArs:BPOSition <NR3>
DISplay:WAVEView<x>:CURSo r:CURSOR<x>:VBArs:BPOSition?
Arguments
<NR3> is the horizontal cursor B position of the specified cursor in the specified
waveview.
2-298 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English