Tektronix MSO56 User Manual

Commands listed in alphabetical order
Conditions
Requires the SR
-AERO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:MIL 1553B:COMMAND:
ADDRess:QUALifier
{EQual|UNEQual|LESSthan|MOREthan
|LESSEQual|MOREEQual|INrange|OUTrange}
TRIGger:{A|B}:BUS:B<x>:MIL 1553B:COMMAND:ADDRess:QUALifier?
Arguments
Arguments are the available address qualifiers.
Examples
TRIGGER:A:BUS:B1:MIL1553B: COMMAND:ADDRESS:QUALIFIER LESSTHAN
sets the address qualifier to less than.
TRIGGER:A:BUS:B1:MIL1553B: COMMAND:ADDRESS:QUALIFIER? might
return EQUAL, indicating that the address qualifier is set to equal.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:COMMAND:ADDRess:VALue
This command sets or queries the low value when triggering on command word
addresses for a MIL-STD-1553 bus. The bus number is specified by x. The trigger
condition must be set to COMMAND
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:MIL 1553B:COMMAND:ADDRess:VALue
<QString>
TRIGger:{A|B}:BUS:B<x>:MIL 1553B:COMMAND:ADDRess:VALue?
Arguments
<QString> is the address value.
Examples
TRIGGER:A:BUS
:B1:MIL1553B:COMMAND:ADDRESS :VALUE "X1000"
sets
the value to X1000.
TRIGGER:A:BU
S:B1:MIL1553B:COMMAND:ADDR ESS:VALUE?
might return
"XXXXX", indicating that the value is XXXXX.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-815

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English