Tektronix MSO56 User Manual

Commands listed in alphabetical order
Syntax
SEARCH:SEARCH
<x>:TRIGger:A:WINdow:WHEn
{ENTERSWindow|EXITSWindow | INSIDEGreater|OUTSIDEGreat er}
SEARCH:SEARCH<x>:TRIGger: A:WINdow:WHEn?
Arguments
ENTERSWindow specifies a window search when the signal enters the window.
EXITS
Window
specifies a window search when the signal e xits the window.
OUTSIDEGreater specifies a search when the signal leaves the window defined
by th
e threshold levels for the time specified by Width.
INSIDEGreater specifies a search when the signal enters the window defined by
the
threshold levels for the time specified by Width.
Examples
SEARCH:SEARCH1:TRIGger:A: WINdow:WHEn EXITSWINDOW specifies a
window search when the signal exits the window.
SEARCH:SEARCH1:TRIGger:A: WINdow:WHEn? might return
:SEARCH:SEARCH1:TRIGGER:A :WINDOW:WHEN ENTERSWINDOW indicating a
window search when the signal enters the window.
SEARCH:SEARCH<x>:TRIGger:A:WINdow:WIDth
This command sets or queries the width setting for a window trigger search to
determine where to place a mark. The search number is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:WINdow:WIDth <NR3>
SEARCH:SEARCH<x>:TRIGger: A:WINdow:WIDth?
Arguments
<NR3> specifi es the minimum width in seconds.
ECL specifies a pre set high level of -1.3 V and TTL specifies a preset high level
of +1.4V.
Examples
SEARCH:SEARCH1:TRIGGER:A: WINDOW:WIDTH 400E–12 sets the window
trigger width setting for search 1 to 0.4 ns.
SEARCH:SEARCH1:TRIGGER:A: WINDOW:WIDTH? might return
:SEARCH:SEARCH1:TRIGGER:A :WINDOW:WIDTH 500.0000E–12, indicating
that the window trigger width setting for search 1 is set to 0.5 ns.
2-750 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English