Commands listed in alphabetical order
Group
Display Contro
l
Syntax
DISplay:REFFFTView<x>:XAXI S:SCALE {LINEAr|LOG}
DISplay:REFFFTView<x>:XAXI S:SCALE?
Arguments
LINEAr specifies a linear scale.
LOG specifies a l ogarithmic scale.
Examples
DISplay:REFFFTView5:XAXIS: SCALE linear sets the x-axis scale to linear.
DISplay:REFFFTView5:XAXIS: SCALE? might return
:DISPLAY:REFFFTVIEW5:XAXIS :SCALE LOG indicating x-axis
scaleforthespecified reference view is logarithmic.
DISplay:REFFFTView<x>:ZOOM:XAXIS:FROM
This command sets or returns the left edge of the zoom x-axis in the specified
plot view.
Group
Zoom
Syntax
DISplay:REFFFTView<x>:ZOOM :XAXIS:FROM <NR3>
DISplay:REFFFTView<x>:ZOOM :XAXIS:FROM?
Arguments
<NR3> is the left edge of the zoom x-axis in the specified plot view.
Examples
DISplay:REFFFTView5:ZOOM:X AXIS:FROM 2.0E+6 sets the left edge of
the specified view to 2.0 MHz.
DISplay:REFFFTView5:ZOOM:X AXIS:FROM? might return
:DISPLAY:REFFFTVIEW5:ZOOM: XAXIS:FROM 1.329573974236 2E+6
indicating the left edge of the specified view is 1.33 MHz.
DISplay:REFFFTView<x>:ZOOM:XAXIS:TO
This command sets or queries the right edge of the zoom x-axis in the specified
plot view.
Group
Zoom
MSO54, MSO56, MSO58, MSO58LP Programmer 2-277
To Next Page
Loading...
Need help?
General
