Tektronix MSO56 User Manual

Commands listed in alphabetical order
DISplay:WAVE
View<x>:CURSor:CURSOR<x>:SCREEN:AYPOSition
This command sets or queries the vertical cursor A position of the specified cursor
in the specified waveview.
NOTE.
WAVEV
iew<x>
is the specified waveview and must be WAVEView1 .
Cursor<x> is the specified cursor and must be CURSOR1 .
Group
Cursor
Syntax
DISplay:WAVEView<x>:CURSor :CURSOR<x>:SCREEN:AYPOSition <NR3>
DISplay:WAVEView<x>:CURSor :CURSOR<x>:SCREEN:AYPOSition?
Arguments
<NR3> the vertical cursor A position of the specified cursor in the specified
waveview.
Examples
DISPLAY:WAVEVIEW1:CURSOR:C URSOR1:SCREEN:AYPOSITION 25.0E-3
sets the y position of the specified screen cursor of the specified waveview to 25
mV.
DISPLAY:WAVEVIEW1:CURSOR:C URSOR1:SCREEN:AYPOSITION? might
return
:DISPLAY:WAVEVIEW1:CURSOR:C URSOR1:SCREEN:AYPOSITION
-53.0000E-03
indicating that y position of the specified screen cursor of the
specified waveview is set to -53 mV.
DISplay:WAVEView<x>:CURSor:CURSOR<x>:SCREEN:BXPOSition
Sets or queries the horizontal c ursor B position of the specified cursor in the
specified waveview.
NOTE.
WAVEView<x > is the specified waveview and must be WAVEView1 .
Cursor<x> is the specified cursor and must be CURSOR1 .
Group
Cursor
Syntax
DISplay:WAVEView<x>:CURSor :CURSOR<x>:SCREEN:BXPOSition <NR3>
DISplay:WAVEView<x>:CURSor :CURSOR<x>:SCREEN:BXPOSition?
Arguments
<NR3> is the horizontal cursor B position of the specified cursor in the specified
waveview.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-295

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English