To Next Page

To Previous Page

Commands listed in alphabetical order

MEASUrement:

MEAS<x>:JITTERSummary:TIE

This command sets or queries whether TIE is included in the jitter summary for

the measurement. Measurements are speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:JITTER Summary:TIE {0|1}

MEASUrement:MEAS<x>:JITTER Summary:TIE?

Arguments

1 add the TIE measurement as part of jitter summary.

0 do not add the TIE measurement as part of jitter summary.

Examples

MEASUrement:MEAS4:JITTERSu mmary:TIE 0 speciﬁes the TIE measurement

is not part of jitter s ummary.

MEASUrement:MEAS4:JITTERSu mmary:TIE? might return

:MEASUREMENT:MEAS4:JITTERS UMMARY:TIE 1 indicating the TIE

measurement is part of jitter summary.

MEASUrement:MEAS<x>:JITTERSummary:TJBER

This command sets or queries whether TJ@BER is included in the jitter summary

for the measurement. Measurements are speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:JITTER Summary:TJBER {0|1}

MEASUrement:MEAS<x>:JITTER Summary:TJBER?

Arguments

1 add the TJ@BER measurement as part of jitter summary.

0 do not add the TJ@BER measurement as part of jitter summary.

Examples

MEASUrement:MEAS4:JITTERSu mmary:TJBER 0 speciﬁes that the TJ@BER

measurement is not part of jitter summary.

MEASUrement:MEAS4:JITTERSu mmary:TJBER? might return

:MEASUREMENT:MEAS4:JITTERS UMMARY:TJBER 1 indicating the TJ@BER

measurement is part of jitter summary.

MSO54, MSO56, MSO58, MSO58LP Programmer 2-461

Tektronix MSO56 User Manual

Questions and Answers: