Tektronix MSO56 User Manual

Commands listed in alphabetical order
Group
Measurement
Syntax
MEASUrement:MEAS<x>:REFLev els<x>:ABSolute:TYPE {SAM E|UNIQue}
MEASUrement:MEAS<x>:REFLev els<x>:ABSolute:TYPE?
Arguments
SAME specifies that the absolute levels are set the same.
UNIQue specifies that the absolute levels can be set independently.
Examples
MEASUrement:MEAS1:REFLevel s1:ABSolute:TYPE UNIQUE specifies that
the absolute levels can be set independently.
MEASUrement:MEAS1:REFLevel s1:ABSolute:TYPE? might return
:MEASUREMENT:MEAS1:REFLEVE LS1:ABSOLUTE:TYPE SAME indicating the
absolute levels are set the same.
MEASUrement:MEAS<x>:REFLevels<x>:BASETop
This command sets or queries the method used to calculate the TOP and BASE
used to calculate reference levels for the measurement. The measurement number
is specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:REFLev els<x>:BASETop
{AUTO|MINMax|MEANhistogram | MODEhistogram|EYEhistogram }
MEASUrement:MEAS<x>:REFLev els<x>:BASETop?
Arguments
AUTO automatically chooses a reference level method.
MINMax specifies that reference levels a re relative to the measurement MIN and
MAX.
MEANhistogram specifies that reference levels are relative to the histogram mean
BASE and TOP.
MODEhistogram specifies that reference levels are relative to the histogram mode
BASE and TOP.
EYEhistogram specifies that reverence levels are relative to the eye histogram
BASE and TOP.
Examples
MEASUrement:MEAS1:REFLevel s1:BASETop MINMAX specifies that reference
levels are relative to the measurement MIN and MAX.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-473

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English