Commands listed in alphabetical order
Arguments
ONE filters stat
us words to only match those where the ME bit has a value of 1.
ZERo filters status words to only match those where the ME bit has a value of 0.
NOCARE disables filtering of status words on the ME bit.
Examples
SEARCH:SEARCH1:TRIGGER:A:B US:MIL1553B:STATUS:BIT:ME ONE
specifies filtering status words for those where the ME bit has a value of 1.
SEARCH:SEARCH1:TRIGGER:A:B US:MIL1553B:STATUS:BIT:ME? might
return NOCARE, indicating that status words are not being filtered based on
the ME bit value.
SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:SRQ
This command sets or queries the value of the status word service request bit
(SRQ bit, bit 11) in a status word for a MIL-STD-1553 bus to search on. The
search number is specified by x. The search condition must be set to STATus.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:MIL1553B:STATus:BIT:SRQ {ONE
ZERo NOCARE}
SEARCH:SEARCH<x>:TRIGger:A :BUS:MIL1553B:STATus:BIT:SRQ?
Arguments
ONE filters status words to only match those where the SRQ bit has a value of 1.
ZERo filters status words to only match those where the SRQ bit has a value of 0.
NOCARE disables filtering of status words on the SRQ bit.
Examples
SEARCH:SEARCH1:TRIGGER:A:B US:MIL1553B:STATUS:BIT:SRQ ONE
specifies filtering status words to those where the SRQ bit has a value of 1.
SEARCH:SEARCH1:TRIGGER:A:B US:MIL1553B:STATUS:BIT:SRQ? might
return NOCARE, indicating that status words are not being filtered based on
the SRQ bit value.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-693
To Next Page
Loading...
Need help?
General
