Commands listed in alphabetical order
CH<x>:DESKew
This command sets or queries the horizontal deskew time for the specified
channel. The channel is specified by x.
Group
Vertical
Syntax
CH<x>:DESKew <NR3>
CH<x>:DESKew?
Arguments
<NR3> is the deskew time for this channel, ranging from -125 ns to +125 ns with a
resolution of 40 ps. Out-of-range values are clipped.
Examples
CH4:DESKEW 5.0E-9 sets the deskew time for Channel 4 to 5 ns.
CH2:DESKEW? might return :CH2:DESKEW 2.0000E-09, indicating that the
deskew time for Channel 2 is set to 2 ns.
CH<x>:LABel:COLor
This command sets or queries the color of the specified channel label. The
channel is specified by x.
Group
Vertical
Syntax
CH<x>:LABel:COLor <QString>
Arguments
<QString> is the label color. To return the color to the default color, send an
empty s tring as in this example:
:CH5:LABEL:COLOR "".
Examples
CH2:LABel:COLor "#FFFF00" sets the label color to yellow.
CH2:LABel:COLor? might return :CH2:LABEL:COLOR "#FF0000" indicating
the color is red.
CH<x>:LABel:FONT:BOLD
This command sets or queries the bold state of the specified channel label. The
channel is specified by x.
2-190 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
