Commands listed in alphabetical order
Syntax
REF<x>_D<x>:L
ABel:YPOS <NR3>
Arguments
<NR3> is the y-position, in pixels relative to the baseline of the waveform, of
the label.
Examples
REF1_D1:LABel:YPOS 10 sets the y position to 10.
REF1_D1:LABel:YPOS? might return :REF1_D1:LABEL:YPOS 0.0E+0
indicating the y position of the label is at the baseline of the waveform.
REM (No Query Form)
This command (no query form) embeds a comment within programs as a m eans
of internally documenting the programs. This is how to embed comments in a .set
file. The instrument ignores these embedded comment lines.
Group
Miscellaneou
s
Syntax
REM <QS tring>
Arguments
<QString> is a string that can contain a maximum of 80 characters.
Examples
REM "This is a comment" is a comment string that the instrument will ignore.
ROSc:SOUrce
This command set
s or queries the selected source for the time base reference
oscillator. The reference oscillator locks to this source. Depending on the
command argument that you specify, you can use an external reference or use the
internal crystal oscillator as the time base reference.
Group
Miscellaneous
Syntax
ROSc:SOUrce {INTERnal|EXTernal}
ROSc:SOUrce?
Related Commands
ROSc:STATE?
2-614 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
