Tektronix MSO56 User Manual

Commands listed in alphabetical order
SEARCH:SEARC
H<x>:TRIGger:A:BUS:USB:ERRTYPE
This command sets or queries the error type for a USB bus search to determine
where to place a mark. The search number is specified by <x>.
Conditions
Requires the SR-US
B2 Serial Triggering and Analysis Application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:USB:ERRTYPE
{BITSTUFFing|CRC5|CRC16|PI D}
SEARCH:SEARCH<x>:TRIGger:A :BUS:USB:ERRTYPE?
Arguments
BITSTUFFing specifiestheerrortypeasBitStuffing.
CRC5 specifies the error type as Token CRC5 (Cyclic Redundancy Check 5).
CRC16 specifies the err or type as Data CRC16 (Cyclic Redundancy Check 16).
PID specifies the error type as PID Check Bits.
Examples
SEARCH:SEARCH1:TRIGGER:A:B US:USB:ERRTYPE CRC5 sets the error type
for USB bus trigger s earch 1 to Token CRC5.
SEARCH:SEARCH1:TRIGGER:A:B US:USB:ERRTYPE? might return
SEARCH:SEARCH1:TRIGGER:A:B US:USB:ERRTYPE PID, indicating that the
error type for USB bus trigger search 1 is set to PID Check Bits.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:HANDSHAKEType
This command sets or queries the handshake type for the specified USB bus trigger
search to determine where to place a mark. The search number is specified by <x>.
Conditions
Requires the SR-USB2 Serial Triggering and Analysis Application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:USB:HANDSHAKEType
{ACK|ANY|NAK|NYET|STALL}
SEARCH:SEARCH<x>:TRIGger:A :BUS:USB:HANDSHAKEType?
MSO54, MSO56, MSO58, MSO58LP Programmer 2-707

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English