EasyManuals Logo
Home>Tektronix>Test Equipment>MSO56

Tektronix MSO56 User Manual

Tektronix MSO56
1026 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #762 background imageLoading...
Page #762 background image
Commands listed in alphabetical order
SEARCH:SEARC
H<x>:TRIGger:A:WINdow:CROSSIng
This command sets or queries the window trigger threshold crossing of the
selected trigger Source. The threshold crossing selection is only effective when
:TRIGger:A:
WINdow:WHEn is INSIDEGreat er or OUTSIDEGreater. The sea rch
number is specied by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:WINdow:CROSSIng
{UPPer|LOWer|EITher|NONe}
Arguments
UPPer if :TRIGger:A: WINdow:WHEn is INSIDEGreater, the instrument
triggers when the signal remains between the upper and lower thresholds for
longer than the time limit (
:TRIGger:A:WINdow:WIDTH) and then exits through
the upper threshold. If
:TRIGger:A:WINdow:WHEn is OUTSIDEGreater,the
instrument triggers when the signal remains above the upper threshold for longer
than the time limit (
:TRIGger:A:WINdow:WIDTH) and then crosses downward
through the upper threshold.
LOWer if :TRIGger:A: WINdow:WHEn is INSIDEGreater, the instrument
triggers when the signal remains between the upper and lower thresholds for
longer than the time limit (
:TRIGger:A:WINdow:WIDTH) and then exits through
the lower threshold. If
:TRIGger:A:WINdow:WHEn is OUTSIDEGreater,the
instrument triggers when the signal remains below the lower threshold for longer
than the time limit (
:TRIGger:A:WINdow:WIDTH) and then crosses upwards
through the lower threshold.
EITher if :TRIGger:A:WINdow:WHEn is INSIDEGreater, the instrument
triggers when the signal remains between the upper and lower thresholds for
longer than the time limit (
:TRIGger:A:WINdow:WIDTH) and then exits
through either the upper or lower threshold. If
:TRIGger:A:WINdow:WHEn is
OUTSIDEGreater, the instrument triggers when the signal remains either above
the upper threshold or below the lower threshold for longer than the time limit
(
:TRIGger:A:WINdow:WIDTH) and then crosses a threshold.
NONe if :TRIGger:A:WINdo w:WHEn is INSIDEGreater, the instrument triggers
when the signal remains between the upper and lower thresholds for longer than
the time limit (
:TRIGger:A:WINdow:WIDTH) without crossing through either the
upper or lower threshold. If
:TRIGger:A:WINdow:WHEn is OUTSI DEGreater,
the instrument triggers when the signal remains outside the upper and lower
thresholds for longer than the time limit (
:TRIGger:A:WINdow:WIDTH) without
crossing through either the upper or lower threshold.
Examples
SEARCH:SEARCH1:TRIGger:A: WINdow:CROSSIng LOWER sets the
CROSSING to LOWER.
2-746 MSO54, MSO56, MSO58, MSO58LP Programmer

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tektronix MSO56 and is the answer not in the manual?

Tektronix MSO56 Specifications

General IconGeneral
BrandTektronix
ModelMSO56
CategoryTest Equipment
LanguageEnglish

Related product manuals