Tektronix MSO56 User Manual

Commands listed in alphabetical order
TRIGger:{A|B
}:BUS:B<x>:MIL1553B:COMMAND:COUNt
This command sets or queries the value of the command word "word count" field
for a MIL-STD-1553 bus to triggering on. The bus number is specified by x. The
trigger cond
ition must be set to COMMAND.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:MI L1553B:CO
MMAND:COUNt
<QString>
TRIGger:{A|B}:BUS:B<x>:MI L1553B:COMMAND:COUNt?
Arguments
<QString> is the word count value.
Examples
TRIGGER:A
:BUS:B1:MIL1553B:COMMAND:C OUNT "X1000"
sets the value
to X1000.
TRIGGER:
A:BUS:B1:MIL1553B:COMMAND:C OUNT?
might return "XXXXX",
indicating that the value is XXXXX.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:COMMAND:PARity
This command sets or queries the value of the command word parity bit for a
MIL-STD-1553 bus to triggering on. The bus number is specified by x. The
trigger condition must be set to COMMAND.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:MI L1553B:COMMAND:PARity
{ONE|ZERo|NOCARE}
TRIGger:{A|B}:BUS:B<x>:MI L1553B:COMMAND:PARity?
Arguments
ONE filters command words to only match those where the parity bit has a value
of 1.
ZERo filters command words to only match those where the parity bit has a value
of 0.
2-816 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English