Commands listed in alphabetical order
PLOT:PLOT1:LA
Bel:NAMe?
might return :PLOT:PLOT 1:LABEL:NAME "This
is a label test plot"
indicating the label name is This is a label test plot.
PLOT:PLOT<x>:LABel:XPOS
This command sets or queries the x-position of the specified trend label. This
command/query only applies to Time Trend plots.
Group
Plot
Syntax
PLOT:PLOT<x>:LABel:XPOS <NR3>
Arguments
<NR3> is the y-position, in pixels relative to the left edge of the display, of the
label.
Examples
PLOT:PLOT1:LABel:XPOS 200 sets the X position to 200.
PLOT:PLOT1:LABel:XPOS? might return :PLOT:PLOT1:LAB EL:XPOS
45.0000
indicating the X position is 45.0 pixels to the right of the left edge
of the display.
PLOT:PLOT<x>:LABel:YPOS
This command sets or queries the y-position of the specified trend label. This
command/query only applies to Time Trend plots.
Group
Plot
Syntax
PLOT:PLOT<x>:LABel:YPOS <NR3>
Arguments
<NR3> is the x-position, in pixels relative to the baseline of the waveform, of
the label.
Examples
PLOT:PLOT1:LABel:YPOS 100 sets the Y position to 100.
PLOT:PLOT1:LABel:YPOS? might return :PLOT:PLOT1:LAB EL:YPO
S
0.0E+0
indicating the Y position of the label is at the baseline of the waveform.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-525
To Next Page
Loading...
Need help?
General
