To Next Page

To Previous Page

Commands listed in alphabetical order

Related Commands

BUS:B<x>:CAN:

BITRate

Arguments

<NR3> speciﬁes the CAN bit rate.

Returns

<NR1> is the bit rate.

Examples

BUS:B1:CAN:BITRate:VALue 400.0E+3 sets the bit rate to 400 k.

BUS:B1:CAN:BITRate:VALue? might return : BUS:B1:CAN:BITRATE:VALUE

500000

, indicating that the bit rate is set to 500,000.

BUS:B<x>:CAN:FD:BITRate

This command sets or queries the increased data phase bit rate used by CAN

FD packets on the speciﬁed CAN bus. The bus is speciﬁed by x. If you select

Custom, use

BUS:B<x>:CAN:FD:BITRate:CUST om to set the bit rate.

Conditions

Requires option SR-AUTO.

Group

Bus

Syntax

BUS:B<x>:CAN:FD:BITRate {RATE1M|RATE2M|RATE3M|RATE4M|RATE5M

|RATE14M|RATE15M|RATE16M|CUSTom}

BUS:B<x>:CAN:FD:BITRate?

Related Commands

BUS:B<x>:CAN:FD:BITRate:CUSTom

Arguments

Arguments specify the bit rate.

Examples

BUS:B1:CAN:BITRATE RATE1M sets the CAN FD bit rate to 1 Mbps.

BUS:B1:CAN:BITRATE? might return :BUS:B1:CAN:BITRATE RATE4M,

indicating that the CAN FD bit rate is 4 Mbps.

BUS:B<x>:CAN:FD:BITRate:CUSTom

This command sets or queries the custom bit rate for the increased data phase of

CAN FD packets on the speciﬁed CAN bus. The bus is speciﬁed by x.

2-128 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 User Manual

Questions and Answers: