Commands listed in alphabetical order
TRIGger:{A|B
}:BUS:B<x>:MIL1553B:STATus:ADDRess:QUALifier
This command sets or queries the qualifier to be used when triggering on status
word addresses for a MIL-STD-1553 bus. The bus number is specified by x. The
trigger cond
ition must be set to STATus.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:MI L1553B:STATus:
ADDRess:QUALifier
{EQual|UNEQual|LESSthan|MOREthan
|LESSEQual|MOREEQual|INrange|OUTrange}
TRIGger:{A|B}:BUS:B<x>:MI L1553B:STATus:ADDRess:QUALifier?
Arguments
Arguments are the available address qualifiers.
Examples
TRIGGER:A:BUS:B1:MIL1553B :STATUS:ADDRESS:QUALIFIER LESSTHAN
sets the address qualifier to less than.
TRIGGER:A:BUS:B1:MIL1553B :STATUS:ADDRESS:QUALIFIER? might return
EQUAL, indicating that the address qualifier is set to equal.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:STATus:ADDRess:VALue
This command sets or queries the low value when triggering on status word
addresses for a MIL-STD-1553 bus. The bus number is specified by x. The trigger
condition must be set to STATus.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:MI L1553B:STATus:ADDRess:VALue
<QString>
TRIGger:{A|B}:BUS:B<x>:MI L1553B:STATus:ADDRess:VALue?
Arguments
<QString> is the address value.
2-822 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
