To Next Page

To Previous Page

Commands listed in alphabetical order

MEASUrement:

MEAS<x>:GATing:HYSTeresis

This command sets or queries the gating hysteresis value when the gating type is

logic. Measurements are speci ﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:GATin g:HYSTeresis <NR3>

MEASUrement:MEAS<x>:GATin g:HYSTeresis?

Arguments

<NR3> is the g ating hysteresis.

Examples

MEASUrement:MEAS1:GATing: HYSTeresis 25.0E-3 sets the hysteresis

to 25 mV.

MEASUrement:MEAS1:GATing: HYSTeresis? might return

:MEASUREMENT:MEAS1:GATING :HYSTERESIS 30.0000E-3 indicating the

hysteresis is set to 30.0 mV.

MEASUrement:MEAS<x>:GATing:LOGICSource

This command sets or queries the gating data source when the gating type is logic.

The measurement number is speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:GATin g:LOGICSource

{CH<x>|MATH<x>|REF<x>}

Arguments

Arguments are the sources for logic gating.

Examples

MEASUrement:MEAS1:GATing: LOGICSource CH3 sets the gating logic source

to channel 3.

MEASUrement:MEAS1:GATing: LOGICSource? might return

:MEASUREMENT:MEAS1:GATING :LOGICSOURCE CH2 indicating the gating

logic source is channel 2.

2-454 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 User Manual

Questions and Answers: