Tektronix MSO56 User Manual

Commands listed in alphabetical order
SEARCH:SEARC
H<x>:TRIGger:A:BUS:ARINC429A:LABel:HIVALue
This command sets or queries the high value when searching on an ARINC429
label field. The search number is specified by x. The search condition must be set
to LABel, and
the label qualifier must be INrange or OUTrange.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:ARINC429A:LABel:HIVALue
<QString>
SEARCH:SEARCH<x>:TRIGger: A:BUS:ARINC429A:LABel:HIVALue?
Arguments
<QString> is the label value.
Examples
SEARCH:SEARCH1:TRIGGER:A: BUS:ARINC429A:LABEL:HIVALUE
"XXXX1010"
sets the value to XXXX1010.
SEARCH:SEARCH1:TRIGGER:A: BUS:ARINC429A:LABEL:HIVALUE? might
return "XXXXXXXX", indicating that the value is XXXXXXXX.
SEARCH:SEARCH<x>:TRIGger:A:BUS:
ARINC429A:LABel:QUALifier
This command sets or queries the qualifier to be used when se arching on label
data for an ARINC429 bus signal. The search number is specified by x. The
search condition must be set to LABe
l or LABELANDDATA.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:ARINC429A:
LABel:QUALifier
{EQual|UNEQual|LESSthan|MOREthan
|LESSEQual|MOREEQual|INrange|OUTrange}
SEARCH:SEARCH<x>:TRIGger: A:BUS:ARINC429A:LABel:QUALifier?
2-634 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English