Tektronix MSO56 User Manual

Commands listed in alphabetical order
Arguments
The window trig
ger source channel.
Examples
TRIGger:A:WINdow:SOUrce CH2 sets the source to channel 2.
TRIGger:A:WINdow:SOUrce? might return :TRIGGER:A:WINDOW:SOURC E
CH3
indicating the source is channel 3.
TRIGger:{A|B}:WINdow:WHEn
This command sets or queries the window trigger event. This command is
equivalent to selecting Window Setup from the Trig menu and selecting from the
Window Trigger When box.
Group
Trigger
Syntax
TRIGger:{A|B}:WINdow:WHEn {ENTERSWindo w|EXITSWindow|
INSIDEGreater|OUTSIDEGrea ter}
TRIGger:{A|B}:WINdow:WHEn ?
Arguments
OUTSIDEGreater specifies a trigger event when the signal leaves the window
defined by the threshold levels for the time specified by Width.
INSIDEGreater specifies a trigger event when the signal enters the window
defined by the threshold levels for the time specified by Width.
ENTERSWindow specifies a trigger event when the signa l enters the window
defined by the threshold levels.
EXITSWindow specifies a trigger event when the signal leaves the window defined
by the threshold levels.
Examples
TRIGger:A:WINdow:
WHEn EXI TSWINDOW
specifies a trigger event when the
signal leaves the window defined by the threshold levels.
TRIGger:A:WINdow
:WHEn?
might return :TRIGGER:A:WINDOW:WHEN
ENTERSWINDOW
indicating a trigger when the signal enters the window.
TRIGger:{A|B}:WINdow:WIDth
This command sets or queries the minimum width for a window violation. This
command is equivalent to selecting Window Setup from the Trig menu, selecting
Inside > Limit or Outside > Limit in the Trigger When box, and setting the Time
Limit.
2-874 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English