Tektronix MSO56 User Manual

Commands listed in alphabetical order
MEASUrement:R
EF1:REFLevels:ABSolute:RISEL ow?
might return
:MEASUREMENT:REF1:REFLEVE LS:ABSOLUTE:RISELOW -1.00 00 indicating
the r eference level is -1.0 V.
MEASUrement
:REF<x>:REFLevels:ABSolute:RISEMid
This command sets or queries the value us ed as the mid reference level of the
rising edge when the m easurement's ref level method is set to absolute.
Group
Measurement
Syntax
MEASUrement:REF<x>:REFLev els:ABSolute:RISEMid <NR3>
MEASUrement:REF<x>:REFLev els:ABSolute:RISEMid?
Arguments
<NR3> is the value used as the mid reference level of the rising edge when the
measurement's ref level method is set to absolute.
Examples
MEASUrement:REF1:REFLevel s:ABSolute:RISEMid 10.0E- 3 sets the
reference level to 10.0 mV.
MEASUrement:REF1:REFLevel s:ABSolute:RISEMid? might return
:MEASUREMENT:REF1:REFLEVE LS:ABSOLUTE:RISEMID 0.0E+ 0 indicating
the mid reference level is 0.0 V.
MEASUrement:REF<x>:REFLevels:ABSolute:TYPE
This command sets or queries the reference level type for the m easurement.
Group
Measurement
Syntax
MEASUrement:REF<x>:REFLev els:ABSolute:TYPE {SAME|U NIQue}
MEASUrement:REF<x>:REFLev els:ABSolute:TYPE?
Arguments
SAME specifies that the absolute levels are set the same.
UNIQue specifies that the absolute levels can be set independently.
Examples
MEASUrement:REF1:REFLevel s:ABSolute:TYPE UNIQUE specifies that the
absolute levels can be set independently.
2-510 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English