Tektronix MSO56 User Manual

Commands listed in alphabetical order
You can set opti
ons for file storage (such as file name, file destination, and auto
increment), using the SAVEON:FILE comma nds.
Use the oscill
oscope interface to select whether to save one or more analog
channels, digital channels, or math waveforms
Analog and m
ath waveforms are saved using one file per waveform. Digital
waveforms are all saved to a single file.
Group
Save On
Syntax
SAVEON:TRIGger {<NR1>|ON|OFF}
SAVEON:TRIGger?
Related Commands
SAVEON:IMAGe, SAVEON:WAVEform, SAVEON:FILE:DEST,
SAVEON:FILE:NAME
Arguments
<NR1> = 0 disables Save On Trigger; any other value turns this feature on.
OFF disables Save On Trigger.
ON enables Save On Trigger.
Examples
SAVEON:TRIGGER ON sets the oscilloscope to save an image, measurement,
and/or waveform when a trigger occurs.
SAVEON:TRIGGER? might return :SAVE ON:TRIGGER ON, indicating that a file
will be saved on triggering.
SAVEON:WAVEform
Sets or queries whether to save a waveform when a trigger occurs when
SAVEON:TRIGger is ON..
The waveform will be saved to the file you selected with SAVEON:FILE:NAME,
in the location that you selected using SAVEON:FILE:DEST. You can set options
for fi le storage (such as file name, file destination, and autoincrement), using
the
SAVEON:FILE commands.
Group
Save On
Syntax
SAVEON:WAVEform {<NR1>|ON|OFF}
SAVEON:WAVEform?
2-626 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English