Tektronix MSO56 User Manual

Commands listed in alphabetical order
source specifie
d by :DATa:SOUrce using the :DATa settings for encoding, width,
andsoforth.
Group
Waveform Transfer
Syntax
WAVFrm?
Related Commands
CURVe, DATa:SOUrce, WFMOutpre?
Examples
WAVFRM? might return the waveform data as: :W FMOUTPRE:BIT_NR
8;BN_FMT RI;BYT_NR 1; BYT_OR MSB;ENCDG A SC;NR_PT 500;PT_FMT
Y; PT_O RDER LINEAR;PT_OFF 0;XINCR 400 .0000E-12; XZERO
0.0000;XUNIT "s";YMULT 4.0000E-3; YOFF 0.0000;YZERO
0.0000;YUNIT "V"; W FID "Ch1,DC coupling, 100.0mV/div,
200.0ns/div, 5000 p oints,Sampl mode"
.
WFMOutpre? (Query Only)
This query-only command queries the waveform formatting data for the
waveform specified by the DATa:SOUrce command. The preamble components
are considered to be of two types; formatting and interpretation. The
formatting components are: ENCdg, BN_Fmt, BYT_Or, BYT_Nr, BIT_Nr.
The interpretation components a re derived from the
DATa:SOUrce specified
waveform.
Group
Waveform Transfer
Syntax
WFMOutpre?
Examples
WFMOUTPRE? might return the waveform formatting data as:
:WFMOUTPRE:BYT_NR 2;BIT_NR 16;ENCDG BINA RY;BN_FMT RI;BYT_OR
MSB;WFID "Ch1, DC coupling, 200.0mV
/div, 10 .00us/div,
1250 po ints, Sample mode";NR_PT 1000;PT_FMT Y;XUNIT
"s";XINCR 80.0000E-9;XZERO 0.0000;PT_OFF 62 5;YUNIT "V";YMULT
31.2500E-6;YOFF 0.0000;YZERO 0.0000;NR_FR 3
.
WFMOutpre:ASC_Fmt? (Query Only)
This query returns the format for ASCII data transferred from the instrument.
No command form is provided as the
format is determined by the data source
2-890 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English