Tektronix MSO56 User Manual

Commands listed in alphabetical order
Arguments
DATA specifi es t
he trigger condition as Data.
SS specifies the trigger condition as Slave Selection.
STARTofframe specifies the trigger condition as start of frame.
Examples
SEARCH:SEARCH1:TRIGGER:A:B US:SPI:CONDITION SS sets the trigger
condition for SPI bus trigger search 1 to SS.
SEARCH:SEARCH1:TRIGGER:A:B US:SPI:CONDITION? might return
:SEARCH:SEARCH1:TRIGGER:A: BUS:SPI:CONDITION DATA, indicating that
the trigger condition for SPI bus trigger s earch 1 is set to Data.
SEARCH:SEARCH<
x>:TRIGger:A:BUS:SPI:DATa:SIZe
This command sets or queries the length of the data string in bytes used for the
specified SPI bus trigger search to determine where to place a mark. The search
condition must
be DATA. The search number is specified by <x> .
Conditions
Requires the SR-COMP Serial Triggering and Analysis Application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:SPI:DATa:SIZe <NR1>
SEARCH:SEARCH<x>:TRIGger:A :BUS:SPI:DATa:SIZe?
Arguments
<NR1> specifies the number of contiguous data bytes.
Examples
SEARCH:SEARCH1:TRIGGER:A:B US:SPI:DATA:SIZE 1 sets the length of the
data string for SPI bus trigger search 1 to 1 byte.
SEARCH:SEARCH2:TRIGGER:A:B US:SPI:DATA:SIZE? might return
:SEARCH:SEARCH2:TRIGGER:A: BUS:SPI:DATA:SIZE 4, indicating that the
length of the data string for SPI bus trigger search 2 is 4 bytes.
SEARCH:SEARCH<x>:TRIGger:A:BUS:SPI:DATa:VALue
The command sets or queries the binary data string used for an SPI bus search
to determine where to place a mark. The search number is s pecified by <x>.
The search condition must be DATA.
Conditions
Requires the SR-COMP Serial Triggering and Analysis Application.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-699

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English