Commands listed in alphabetical order
HORIZONTAL:DE
LAY:MODE
? might return HORIZO NTAL:DELAY:MODE OFF
indicating that the Horizontal Delay Mode is off and that the horizontal position
command operates like the HORIZONTAL POSITION knob on the front panel.
HORizontal:
DELay:TIMe
This command sets or queries the horizontal delay time that is used when delay
mode is on.
Group
Horizontal
Syntax
HORizontal:DELay:TIMe <NR3>
HORizontal:DELay:TIMe?
Related Commands
HORizontal:POSition
Arguments
NR3 is the delay in seconds.
Examples
HORizontal:DELay:TIME 0.3 sets the delay of acquisition data so that the
resulting waveform is centered 300 ms after the trigger occurs.
HORizontal:DIVisions? (Query Only)
This query-only comm
and returns the number of graticule d ivisions.
Group
Horizontal
Syntax
HORizontal:DIVisions?
Examples
HORIZONTAL:DIVISIONS? might return :HORIZONTAL:DIVISIONS 10.0000,
indicating that the waveform is displayed across ten divisions.
HORizontal:FASTframe? (Query Only)
This query returns all information under horizontal:fastframe.
Group
Horizontal
MSO54, MSO56, MSO58, MSO58LP Programmer 2-341
To Next Page
Loading...
Need help?
General
