To Next Page

To Previous Page

Commands listed in alphabetical order

Syntax

DISplay:WAVEV

iew<x>:REF:REF<x>:STATE {<NR1>|OFF|ON }

DISplay:WAVEView<x>:REF:R EF<x>:STATE?

Arguments

<NR1> = 0 disables the speciﬁ ed reference in the speciﬁed waveview; any other

value turns this feature on.

OFF disables the speciﬁed reference in the speciﬁed waveview.

ON enables the speciﬁed reference in the speciﬁed waveview.

Examples

DISplay:WAVEView1:REF:REF 1:STATE OFF disables the speciﬁed reference

in the speciﬁed waveview.

DISplay:WAVEView1:REF:REF 1:STATE? might return

:DISPLAY:WAVEVIEW1:REF:RE F1:STATE 1 indicating the speciﬁed

reference in the speciﬁed waveview is on.

DISplay:WAVEView<x>:REF:REF<x>:VERTical:POSition

This command sets or queries the vertical position in divisions of the s peciﬁed

reference in the speciﬁed waveview.

NOTE.

WAVEView<x>

is the speciﬁed waveview and must be

WAVEView1

Group

Display Control

Syntax

DISplay:WAVEView<x>:REF:R EF<x>:VERTical:POSition < NR3>

DISplay:WAVEView<x>:REF:R EF<x>:VERTical:POSition?

Arguments

<NR3> is the vertical position in divisions.

Examples

DISplay:WAVEView1:REF:REF 1:VERTical:POSition -2.5e 0 sets the

position to -2.5 divisions.

DISplay:WAVEView1:REF:REF 1:VERTical:POSition? might return

:DISPLAY:WAVEVIEW1:REF:RE F1:VERTICAL:POSITION -2.6 400

indicating the position is set to -2.64 divisions.

DISplay:WAVEView<x>:REF:REF<x>:VERTical:SCAle

This command sets or queries the vertical scale of the speciﬁed reference in volts

per div within the s peciﬁed waveview.

2-308 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 User Manual

Questions and Answers: