Commands listed in alphabetical order
:MEASUREMENT:
CLOCKRECOVERY:CLOCKFREQUENCY ?
might return
:MEASUREMENT:CLOCKRECOVERY :CLOCKFREQUENCY 2.5000E+9 indicating
the clock frequency is set to 2.5 GHz.
MEASUrement
:CLOCKRecovery:CLOCKMultiplier
This command sets or queries the global clock multiplier used when explicit
clock recovery is used for the measurement. This will affect measurements whose
:MEASUrem
ent:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 1.
Group
Measurement
Syntax
MEASUrement:CLOCKRecovery: CLOCKMultiplier <NR3>
MEASUrement:CLOCKRecovery: CLOCKMultiplier?
Arguments
<NR3> is the global clock multiplier.
Examples
MEASUREMENT:CLOCKRECOVERY: CLOCKMULTIPLIER 1.000 sets the clock
multiplier to 1 .000.
MEASUREMENT:CLOCKRECOVERY: CLOCKMULTIPLIER? might return
:MEASUREMENT:CLOCKRECOVERY :CLOCKMULTIPLIER 1.0000 indicating
the clock multiplier is set to 1.0000.
MEASUrement:CLOCKRecovery:CONSTCLOCKMODe
This command sets or queries the global constant clock mode used when constant
clock recovery is used for the measurement. This will affect measurements whose
:MEASUrement:MEAS<x>:CLOCKRecovery:GLOBal flag is set to 1.
Group
Measurement
Syntax
MEASUrement:CLOCKRecovery: CONSTCLOCKMODe {MEAN|MEDian| FIXed}
MEASUrement:CLOCKRecovery: CONSTCLOCKMODe?
Arguments
MEAN sets the constant clock mode to MEAN.
MEDian sets the constant clock mode to MEDian.
FIXed sets the constant clock mode to FIXed.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-393
To Next Page
Loading...
Need help?
General
