Tektronix MSO56 User Manual

Commands listed in alphabetical order
BUS:B<x>:ETH
ERNET:SOUrce:DPLUs
This command sets or q ueries the Ethernet D+ source for the specified bus. this
command specifies the source channel to use when the signal type is single ended.
The bus is spe
cified by x.
Group
Bus
Syntax
BUS:B<x>:ETHERNET:SOUrce: DPLUs {CH<x>|MATH<x>|REF< x>}
BUS:B<x>:ETHERNET:SOUrce: DPLUs?
Arguments
Argument is the D+ source.
Examples
BUS:B1:ETHERNET:SOUrce:DP LUs Ch5 sets the D+ source to channel 5.
BUS:B1:ETHERNET:SOUrce:DP LUs? might return
:BUS:B1:ETHERNET:SOURCE:D PLUS CH5 indicating the D+ source is set to
channel 5.
BUS:B<x>:ETHERnet:THRESHold
This command sets or queries the Ethernet DATA source High threshold for the
specified bus. The bus is specified by x.
Conditions
Requires option SR-ENET.
Group
Bus
Syntax
BUS:B<x>:ETHERnet:THRESHo ld <NR3>
BUS:B<x>:ETHERnet:THRESHo ld?
Related Commands
BUS:B<x>:ETHERnet:SOUrce
Arguments
<NR3> is the Ethernet DATA source High threshold for the specified bus.
Examples
BUS:B4:ETHERNET:THRESHOLD 1.0 sets the Bus 4 Ethernet DATA source High
threshold to 1.0 V.
2-138 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO56 Specifications

General

Brand	Tektronix
Model	MSO56
Category	Test Equipment
Language	English