SP Set To: Comments
4-012-005 1.5 Scanner Edge Margin - DF: Leading Edge
4-012-006 Scanner Edge Margin - DF: Trailing Edge
4-012-700 Scanner Edge Margin - DF: Left Edge
4-012-008 0.5 Scanner Edge Margin - DF: Right Edge
Step 8: Erase Margins
Do these SPs to replace the settings done in Step 6.
SP Set To: Comments
2-103-001 2 Printing Erase Margin – Leading Edge
2-103-002 Printing Erase Margin – Trailing Edge
2-103-003 Printing Erase Margin – Left Edge
2-103-004 0.5 Printing Erase Margin – Right Edge
Step 9: Scanner Registration
1. Use the A1 LEF Test Chart to make a 1:1 copy on plain A1 LEF paper.
2. On the copy, measure the gap between the chart image at the leading edge and at the left edge.
3. Adjust these SPs if necessary.
SP Standard Comments
4-010-001 ±3 mm Scanner Sub Scan - Leading Edge Reg Adjustment
4-010-002 ±2.8 mm Scanner Main Scan - Trailing Edge Reg Adjustment
4-011 ±2.8 mm Scanner Main Scan - Registration
Special Adjustments
583