7. Touch [Exit].
8. Touch [User Tools] on the top right of the screen.
• To check the results of cleaning print heads, print the test pattern again and check it.
• If all nozzles are dropping ink and colors are not mixed, cleaning ends.
• If a nozzle is clogged after cleaning print heads three times, perform flushing print heads. For each
maintenance, check the nozzle check pattern.
Flush Print Heads
If a nozzle is clogged after repeated cleaning print heads, perform flushing print heads to clean the print
heads strongly.
• During flushing the print heads, do not conduct any other operations.
• During flushing the print heads, do not open the cover.
• If the ink collector box is full, flushing print heads cannot be performed.
• If one of the ink tanks is empty, flushing print heads cannot be performed.
• If ink-near-end or ink-end is detected during flushing, flushing print heads may not be completed.
• As flushing print heads consumes more ink than cleaning, perform flushing only when necessary.
1. Touch [Home] at the bottom of the screen in the center.
2. Flick the screen to the left, and then touch the User Tools icon.
3. Touch [Machine Features].
4. Touch [Maintenance].
5. Touch [Flush Print-heads].
6. Select the color of the head for flushing and touch [Start].
7. Detailed Description
878
To Next Page
Loading...
Need help?
General