SP Data Import/Export
Data that can be imported and exported
• System SP
• Printer SP
• Fax SP
• Scanner SP
Exporting Device Information
When exporting SP device information from the control panel, the data is saved on an SD card.
1. Insert an SD card into the media slot on the side of the control panel.
2. Enter SP mode.
3. Press SP5-749-001 (Import/Export: Export)
4. Select “Target” SP settings (System/Printer/Fax/Scanner) to be exported.
5. Select “Option” settings (Unique/Secret).
Item Specification Note
Unique Unique
information of the
machine is
included in the
exported file if
you select
"Unique" setting.
Unique information that can be updated
#1. Items that are to be used to identify the machine.
Example: Network Information/ Host name / Information
related to fax number /Mail address assigned to the machine
#2. Items for specifying the options equipped on the machine.
Example: Lot number for developer
Unique information that cannot be updated
#1. Items that may cause a problem if imported
Example: Serial number / Information related to @Remote
#2. Items for managing the history of the machine
Example: Time and date / Counter information / Installation
date
#3. Setting values for the Engine
5. System Maintenance Reference
644
To Next Page
Loading...
Need help?
General