81
Operating systems
COMAND radio
! Do not affix stickers or labels to the discs, as
they could peel off and damage COMAND.
COMAND is designed to hold discs which com-
ply with the EN 60908 standard. You can there-
fore only use discs with a maximum thickness of
1.3 mm.
If you insert thicker discs, e.g. those that contain
data on both sides (DVD on one side and audio
data on the other), they cannot be ejected and
can damage COMAND.
Do not use discs 8 cm in diameter, even if they
have an adapter. Only use round discs 12 cm in
diameter.
ì•« Only hold discs by the edge.
ì•« Handle discs carefully to prevent play-
back problems.
ì•« Avoid getting scratches, fingerprints
and dust on discs.
ì•« Clean discs from time to time with a
commercially-available cleaning cloth.
Do not wipe them with a circular mo-
tion, but only in straight lines from the
centre outwards.
ì•« Only use a pen designed for such a pur-
pose to label discs.
ì•« Place discs back in their cases after
use.
ì•« Protect discs from heat and direct sun-
light.
i If the CD/DVD has a printed side, this must
face upwards when the CD/DVD is loaded. If
neither side is printed, the side to be played
should face downwards.
CDs/DVDs with copy protection may not be
able to be played by the system.
Loading the single DVD drive
1 Disc slot
2 Eject button
왘 Press eject button 2.
If a disc is loaded, it will be ejected.
왘 Take the disc out of slot 1.
왘 Slide a disc into slot 1.
The drive draws the disc in and plays it
if it has been loaded correctly and if it
is a permissible type.
Notes about handling CDs/DVDs
Loading CDs and DVDs
G Risk of accident
Only load a CD or DVD when the vehicle is
stationary. There is a risk of being distracted
from the road and traffic conditions if this is
done while the vehicle is in motion.
P82.86-5146-31
To Next Page
Loading...
Need help?
General
