69
Operating systems
COMAND introduction
왘 To select “Radio”: slide qm or turn
ymz.
왘 To confirm the selection: press n.
The basic radio menu appears.
왘 To select “Radio”: slide mr or turn
ymz.
왘 To confirm the selection: press n.
The radio menu appears.
왘 Select “Save station” from the selec-
tion list.
왘 Select the desired preset position.
왘 To confirm the selection: press n.
The set station is stored in the selected
preset position.
i The components and operating principles of
COMAND can be found on (
컄 page 61).
Switching COMAND on or off
왘 Press the o button.
COMAND calls up the previously se-
lected menu.
i If you switch off COMAND, playback of the
current audio or video source will also be
switched off. You cannot switch off COMAND
during a telephone conversation.
Sound
왘 To switch on or off: press the F
button.
The sound from the respective audio or
video source is switched on or off.
i When the sound is switched off, you will see
the F icon in the status line.
If you change the audio or video source, the
sound is automatically switched on.
You will still hear traffic announcements and nav-
igation system announcements, even if the
sound is switched off.
P82.86-4837-31
P82.86-4838-31
P82.86-4839-31
Basic functions of COMAND
To Next Page
Loading...
Need help?
General
