235
Operating systems
Instrument cluster operating system
You can control the multi-function display
and the settings in the operating system
with the buttons on the multi-function
steering wheel.
Several functions are combined themati-
cally in the menus. In the “Settings” menu,
for example, you will find functions for
making settings for your vehicle. You can
use a function to call up information or to
change settings for your vehicle.
You can think of the order of the basic
menus as a loop:
왘 Press the & or ( button repeat-
edly to change the basic menus.
The number of menus depends on the op-
tional equipment in your vehicle.
The L back button will take you up one
menu level.
From the top menu level, you will always go
to the last active screen from the “Trip”
menu. If you press the back button L
again, you will change to the standard dis-
play.
You can confirm messages about malfunc-
tions with # or L. These are then
stored in the message memory and can be
called up if necessary (
컄 page 246).
Multi-function steering wheel
P46.10-2700-31
1 Multi-function display
2 s Accepts a call*
t Ends a call*
æ Increases the volume
ç Decreases the volume
o Mute
3 ! Switches on voice control*
4 L Back/switches off voice
control*
5 $ Scrolls up
% Scrolls down
& Moves right
( Moves left
# Confirms a selection
To Next Page
Loading...
Need help?
General
