238
Operating systems
Instrument cluster operating system
.
i You will find a menu overview on
(
컄 page 236).
In the “Trip” menu, you can show an addi-
tional display for the speedometer and call
up or reset statistical data for your vehicle.
Standard display
You can see the trip meter and the total
distance recorder in the standard display.
1 Total distance recorder
2 Trip meter
Consumption statistics after start
i You will find a menu overview on
(컄 page 236).
왘 Press ( or & to select the “Trip”
menu.
왘 Press % or $ to select “After
start”.
1 Distance driven since start
2 Time elapsed since start (switching on
the ignition)
3 Average speed since start
4 Average fuel consumption since start
i All values relating to the last engine start are
reset if you leave the vehicle parked for longer
than four hours (key in position 0 in the ignition
lock or removed).
i The values will not be reset if you turn the ig-
nition key back to position 1 or 2 during this
time.
The consumption statistics since start
are automatically reset after 999 hours or
9,999 kilometres.
Consumption statistics after reset
i You will find a menu overview on
(
컄 page 236).
왘 Press ( or & to select the “Trip”
menu.
왘 Press % or $ to select “After re-
set”.
1 Distance driven since last reset
2 Time elapsed since last reset (with the
ignition switched on)
3 Average speed since last reset
4 Average fuel consumption since last re-
set
Trip menu
P54.32-3362-31
P54.32-3366-31
P54.32-3368-31
To Next Page
Loading...
Need help?
General
