204
Operating systems
COMAND system settings
앫 “Tow-away protection”*
You can use the programmable button
to prime or deactivate tow-away pro-
tection*.
앫 “Interior motion sensor”*
You can use the programmable button
to prime or deactivate the interior mo-
tion sensor*.
앫 “Tow-away protection/interior motion
sensor”*
You can use the programmable button
to prime or deactivate tow-away pro-
tection and the interior motion sensor.
앫 “Repeat navigation command”*
You can use the programmable button
to recall the last recommendation of
the navigation system*.
왘 Select “Vehicle” “System settings”
“Favourite”.
The list of predefined functions ap-
pears. The R dot in front of the list en-
try indicates the current setting.
왘 To change the setting: turn ymz and
select the desired function.
왘 To store the setting and exit the
menu: press n.
General information about Bluetooth
Bluetooth technology is the standard for
short-range wireless data transmission of
up to approximately 10 metres. Bluetooth
can be used to exchange vCards or make
calls using a headset or handset, for exam-
ple.
Switching Bluetooth on or off
왘 Select “Vehicle” “System settings”
“Services” “Deactivate Blue-
tooth”.
You have switched Bluetooth on or off.
A tick appears when Bluetooth is
switched off.
Connecting Bluetooth devices
i To connect a Bluetooth device, the Blue-
tooth function must be switched on in COMAND
and in the device concerned. The Bluetooth de-
vice must also be “visible” to COMAND in order
for COMAND to find and display it. For the set-
ting procedures, please see the operating in-
structions for the Bluetooth device.
It is possible to establish a Bluetooth con-
nection between COMAND and the follow-
ing types of device:
앫 Mobile phone (only for transferring
vCards)
앫 Handset
앫 Headset
앫 Laptop/PDA
You can connect up to twelve devices to
COMAND.
The connection process includes search-
ing for the device and its subsequent au-
thorisation.
Calling up the Bluetooth device list and
searching for devices
왘 To call up the list: select “Vehicle”
“System settings” “Services”
“Search for Bluetooth devices”.
When you call up the list for the first
time after switching on COMAND, the
search for devices in the reception
range starts automatically. You will see
a display to this effect.
The device list appears after a short
while.
Bluetooth* settings
To Next Page
Loading...
Need help?
General
