118
Operating systems
COMAND telephone*
왘 To switch back to the call display:
select “Y Back”.
Ending an active call
왘 To end a call: select “Tel” “Tel”
“Telephone” “4 END”.
or
왘 Press the t button on the tele-
phone keypad or the multi-function
steering wheel.
Rejecting or accepting a waiting call
i The “Call waiting” function must be support-
ed by the telephone provider and be activated.
If you are having a single conversation and
receive another call, the call waiting dis-
play will appear. You will also hear a ringing
tone.
왘 To reject: select “Reject”.
or
왘 Press the t button on the tele-
phone keypad or the multi-function
steering wheel.
왘 To accept: select “Accept”.
or
왘 Press the s button on the tele-
phone keypad or the multi-function
steering wheel.
If you accept the waiting call using the
COMAND controller, the telephone key-
pad, the multi-function steering wheel,
Linguatronic* or the Bluetooth headset,
the current call will be ended.
If you accept the waiting call using the mo-
bile phone or the rear handset*, the cur-
rent call will be put on hold. You will then
have two calls, with the accepted call as
the active call.
Connecting a second call actively
i The function must be supported by the tele-
phone provider and be activated.
In addition to accepting a waiting call, you
can also connect a second call actively.
You can only operate this function using
the mobile phone or the rear handset*
(
컄 mobile phone or rear handset* operat-
ing instructions).
Telephone mode with two active calls
1 Call on hold
2 Active call
3 To end all calls
Switching between two calls (toggling)
You can only operate this function using
the mobile phone or the rear handset*
(
컄 mobile phone or rear handset* operat-
ing instructions).
Two calls
P68.20-5069-31
To Next Page
Loading...
Need help?
General
