420
Operation
Care
Parktronic*
The sensors are located in the front and
rear bumpers.
1 Parktronic sensors in the front bumper
왘 Clean the sensors in the bumper with
water, car shampoo and a soft cloth.
! Do not use dry, coarse or hard cloths and do
not scrub. You will otherwise scratch or damage
the sensors. If you use a high-pressure cleaner
or steam cleaner to clean the sensors, observe
the information issued by the equipment manu-
facturer relating to how much distance should be
maintained between the vehicle and the nozzle
of the high-pressure cleaner or steam cleaner.
Park Assist*
The sensors are integrated in the front and
rear bumpers and are not visible from the
outside.
Locations of the sensors
왘 Clean the sensor area in the bumper
with water, car shampoo and a soft
cloth.
! Do not use dry, coarse or hard cloths and do
not scrub. You will otherwise scratch or damage
the surface.
Reversing camera*
1 Camera lens
왘 Clean camera lens 1 with clean water
and a soft cloth.
! Do not clean the camera lens or the area
around the camera using:
ì•« a high-pressure cleaner
ì•« a dry cloth and firm pressure
ì•« aggressive cleaning agents
You could otherwise damage the camera.
P54.65-3091-31
P54.65-3042-31
P54.00-2497-31
To Next Page
Loading...
Need help?
General
