75
Operating systems
COMAND radio
왘 Select “Audio” “Audio” “Radio”.
or
왘 Press the M function button once or
twice.
The radio display appears once you
have switched to radio mode. You will
hear the previously set station on the
previously set waveband.
i The number of times you have to press the
function button depends on the operating mode
currently selected.
Radio operation
1 Main area showing station and fre-
quency
2 Preset position of the selected station
3 Name of the selected station
4 Sound settings
5 To display/switch waveband
6 Preset options
7 Radio options
You can switch the radio between the FM,
MW, LW and SW wavebands.
왘 Select “Audio” “Audio” “Radio”
waveband display 5.
왘 Select the desired waveband.
You will hear the previously set station
on the selected waveband.
i In the MW, LW and SW wavebands,
COMAND shows the station frequency instead
of the station name.
You can tune in stations from the station
list or by manually entering the frequency.
Tuning in stations using the station list
i The station list is only available in the FM
waveband. It contains all the stations that can
currently be received and is sorted alphabetical-
ly. For stations without a programming service,
the list shows the frequency instead of the
name.
Switching to radio mode
P82.86-5063-31
Switching wavebands
Tuning in stations
To Next Page
Loading...
Need help?
General
