232
Operating systems
Rear Seat Entertainment System*
Video AUX
왘 To select the source: select “AUX 1”
or “AUX 2”.
왘 Press n.
You will hear and see the medium in the
external video source in fullscreen
mode if this is connected and switched
to playback.
왘 To switch between full screen and
the menu system: slide qmr.
Picture settings
왘 Select “AUX”.
A list appears.
왘 Proceed as described in the “Picture
settings” section (
컄 page 105).
왘 To select the menu: select “System
settings”.
왘 Press n.
Display settings
왘 Select “Display”.
왘 Proceed as described in the “Display
settings” section (
컄 page 200).
Language settings
왘 Select “Language”.
왘 Proceed as described in the “Setting
the system language” section
(
컄 page 203).
Setting the loudspeaker
This function allows you to set whether the
sound from the right-hand or left-hand
source is switched to the vehicle loud-
speakers (only on vehicles with a sound
system*).
i You can only select this setting on the active
screen.
왘 Select “Loudspeaker”.
A list appears. The R dot indicates the
current setting.
왘 To change the setting: select the de-
sired source.
The source is set.
COMAND and the Rear Seat Entertainment
System are virtually independent of each
other when operated at the same time.
However, there can be conflict in some
menus if the two systems are used by sev-
eral users. The conflicts can occur be-
tween the two rear screens as well as
between COMAND and the Rear Seat En-
tertainment System.
P82.86-5360-31
System settings
P82.86-5037-31
Several users
To Next Page
Loading...
Need help?
General
