SERVICE INFORMATION
J006 18 SM
5.1.3 TO SELECT USB AUTO SELECT MODE
You can use either USB 1.1 or USB 2.0 in this mode.
1. Press the [Power] key to switch the printer off, then press these keys:
+ +
+
+ +
+
+ +
5.1.4 TO FEED 3 CLEAN SHEETS
This removes condensation from the transport belt.
1. Press the [Power] key to switch the printer off, then press these keys:
+ +
+
2. Press this key sequence 5 times
:
+
+
5.1.5 TO PREPARE THE PRINTER FOR TRANSPORT
1. Press the [Power] key to switch the printer off, then press these keys:
+ + . Then release only when the ink LEDs light.
2. Press and hold
+ , press 8 times then wait for the [Power] key to go off.
To Next Page
Loading...
Need help?
General
