Printer Display Summary
J007/J010/J011 4-2 SM
4.1.2 DISPLAY MENU SUMMARY
Here is a summary of the function menus. Items needed for printer maintenance or
troubleshooting are marked with an asterisk (*).
Menu/Menu Item Function
Paper Input
Tray Paper Size Specifies size of paper loaded in the paper tray.
Paper Type Specifies type of paper loaded in the paper tray.
Aut. Tray Select
Specifies whether to select automatically the tray according to paper
size and type (Tray 1 or optional bypass tray).
Tray Priority Specifies priority paper tray selection (Tray 1 or bypass tray).
Default: Tray 1
List/Test Print
List/Test Print Prints information that tells you the current configuration of the
printer.
Config.Page* System Reference. Lists printer version, attached options, name of
print language, amount of ink remaining for each ink cartridge.
Paper Input. Lists the specified Tray Priority setting and the Paper
Input menu settings.
Host Interface, Interface Information. Lists the settings of the Host
Interface menu
Maintenance
Nozzle Check* Prints the cross-hatch test pattern so you can visually confirm
whether inks are ejecting correctly from the print head.
Head-cleaning* Cleans the print head. Clean the print head when certain colors are
missing or printing faintly. Head cleaning consumes ink.
Head-flushing* Cleans the print head more thoroughly than "Head-cleaning".
Flushing consumes more ink. Use this function only after "Head-
cleaning" fails to solve the problem.
Head Position* Adjusts the alignment of the print head if the Nozzle Check test
pattern shows broken vertical lines, or if printed images are blurred.
Adj. Paper Feed* Adjusts the paper feed setting if the Nozzle Check test pattern
shows horizontal misalignment, or if printed images appear uneven.
Registration Adjusts the print starting point for each paper tray. Use the Nozzle
Check test pattern as reference.
Key Repeat Enables/disables repetition of a key pushed and held down on the
operation panel.
Paper Feed Test* Feeds and ejects 1 blank sheet of paper to remove moisture inside
the machine.