To Next Page

To Previous Page

SP Tables

SM 5-17 J007/J010/J011

J007/J010

J011

Set Charge for Target Market

1238 CHG:REGION Set Charge for Geographic Region

Use the SP to set the charge for the areas listed below.

0: Enable geographical area setting

1: Japan

2: NA (North America)

3: Europe

4: China (Mainland)

5: China (Taiwan) "5" and "4" refer to same pitch table.

6: Asia. "4" "5" "6" refer to same charge pitch table

If any item other than "0" is selected that item and its setting is enabled and

takes priority.

[0 to 6/0/1/---]

Print Head Temperature Thresholds

1300 HTEMP:H:STOP Trigger Shutdown: Standby, Printing

1301 HTEMP:H:JUDG Trigger Shutdown: Power On

1302 HTEMP:H:RCVR Recovery After High Temp Shutdown

1303 HTEMP:L:RCVR Recovery After Low Temp Shutdown

1304 HTEMP:L:JUDG Trigger Shutdown: Power On

1305 HTEMP:L:STOP Trigger Shutdown: Standby, Printing

Use this SP to set the threshold for the operating temperature range of the print

head.

[0 to 1000/0/1/0.1

Ambient Temperature Thresholds

1306 ETEMP:H:STOP High Temperature to Trigger Shutdown: Standby, Printing

1307 ETEMP:H:JUDG High Temperature to Trigger Shutdown: Power On

1308 ETEMP:H:RCVR Recovery After High Temp Shutdown

1309 ETEMP:L:RCVR Recovery After Low Temp Shutdown

1310 ETEMP:L:JUDG Low Temperature to Trigger Shutdown: Power On

1311 ETEMP:L:STOP Low Temperature to Trigger Shutdown: Standby, Printing

Use this SP to set the threshold for the operating humidity range of the print

head.

[0 to 1000/0/1/0.1

CÓPIA NÃO CONTROLADA

Ricoh J011 User Manual

Other manuals for Ricoh J011