Ricoh J011 User Manual

Bit Switches
J007/J010/J011 5-38 SM
5.3.2 BIT SWITCH SUMMARY
Bit SW 1: Drive Cleaning
Setting
Bit Meaning
0 1
Default Details
0
Print Head Cap
Control
OFF ON 1 Do not change this setting.
1
Drive Cleaning
Control
OFF ON 0
After setting to "1" returns to "0"
immediately after drive cleaning
is finished.
2 Reserved Do not change this setting.
3
Ink Supply Pump
Long Term Unused
OFF ON 1
4 Not Used
5 Not Used
6 Not Used
7 Not Used
Bit SW 1 is used to perform drive cleaning. Drive cleaning should be performed by the
service technician after head cleaning and head flushing (done with either the operation
panel or the printer driver) fail to clean the print heads successfully. For more detailed
instructions about how to do this, please refer to "Drive Cleaning" at the end of "Image
Correction" in Section "4. Troubleshooting".
Bit SW 2. Not used. Do not change these settings.
Bit SW 3 Emulation
Setting
Bit Function
0 1
Default Details
0 Not Used
1 Not Used
2 PCL5e/5c OFF ON 0
Makes the printer compatible
with old HP PCL printer drivers
(HP4000, HP8000, etc.)
3 Not Used
4 Not Used
5 Not Used
Rev. 09/2008
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA

Ricoh J011 Specifications

General

Brand	Ricoh
Model	J011
Category	Printer
Language	English