Arrival Check
Repair Center Manual 7 J007/J010/J011
J007/J010/
J011 Repair
Center
Manual
Arrival Check
Machine Check After Arrival at the Center
RPCS Printer Driver
Do this procedure as soon as the printer arrives at the service center.
This procedure can be done with the RPCS printer driver only.
1. Confirm that paper is loaded in the printer.
2. Open the printer driver. For example, click Start> Settings> Printer to open the
"Printers" folder, then right-click and open the printer icon to open the driver.
3. Click "Maintenance"> "Nozzle Check".
4. Press and hold down [Ctrl]+[Shift]+[1] then click the [Next] button.
5. Check the printed pattern.
To Next Page
Loading...
Need help?
General
