Printer Display Summary
J007/J010/J011 4-4 SM
Menu/Menu Item Function
Gateway Address 0.0.0.0
Frame Type (NW) Auto Select
Active Protocol All Active
Ethernet Speed Auto Select
USB Setting
USB Speed Auto
Port Off
Language Determines the language used for all prompts and messages on the
operation panel display.
English English, German, French, Italian, Dutch, Swedish, Norwegian,
Danish, Spanish, Portuguese. Default: English
4.1.3 OPERATION PANEL STATUS AND ERROR MESSAGES
Here is a summary of the status and error messages that appear on the display of the
printer operation. panel. A status message tells you the current status of the printer, and
does indicate a problem. There is no reason to take any action, other than wait while the
printer completes its task.
Message Type What It Means
Cannot use. High
Tem p.
Power Off On
Error The printer is overheated. Turn the printer off. Allow it
to cool. Turn the printer on again.
Cannot use. Low
Tem p.
Power Off On
Error Temperature inside the printer is abnormally low. Cycle
the printer off/on.
Change Setting Tray
#
Error The size of the paper in the selected tray does not
match the paper size selected for the print job. Load
the tray with the specified size, then on the operation
panel change the paper size setting for the tray. Or you
can load the other tray with the specified paper size,
push [Form Feed], select the other tray, and push
[#Enter].
Change Settings Tray
#
Error The type of paper in the selected tray does not match
the specified paper type. Load the tray with the paper
of the specified type, and then change the paper type
setting for the tray. Or you can load the required paper
in the other tray, push [Form Feed], select the other
tray, and push [#Enter].
To Next Page
Loading...
Need help?
General
