Preparation
SM 1-1 J007/J010/J011
J007/J010/
J011
1. INSTALLATION
1.1 PREPARATION
1.1.1 ENVIRONMENT
Set up the machine in a location that meets these minimum requirements:
Temperature
Range:
10°C to 32°C (50°F to 89.6°F)
Humidity Range: 15% to 80% RH
Ambient
Illumination:
Less than 1,500 Lux (never expose to direct sunlight).
Ventilation: More than 30 m3/hr/person in the work area
Ambient Dust: Less than 0.10 mg/m3
1.1.2 CHOOSING A LOCATION
1. Always install the machine:
On a sturdy, level surface.
Where it will not become damp.
To Next Page
Loading...
Need help?
General
