SP Tables
J007/J010/J011 5-18 SM
5.2.3 GROUP 2000
Set Threshold for Near-Full Alert
2000 TH:WASTE:R:SNS Toner Collection Unit Sensor
Use this SP to set the threshold value to trigger near full alert for the ink collection
tank sensor.
[0 to 1023/0/1/---]
2001 TH:WASTE:R:SOFT Software Count : Right Toner Collection Unit
Use this SP to set the threshold value to trigger the full alert for the ink collection
tank sensor.
[0 to 2147483647/0/1/nl]
2002 TH:WASTE:R:FULL Software Count : Right Toner Collection Unit
Use this SP to set the threshold value of the firmware counter to trigger the full
alert for the right ink collection tank sensor.
[0 to 2147483647/0/1/nl]
2003 TH:WASTE:L:NEAR Software Count : Left Toner Collection Unit
Use this SP to set the threshold value of the firmware counter to trigger the full
alert for the left ink collection tank sensor.
[0 to 2147483647/0/1/nl]
2004 TH:WASTE:L:FULL Software Count: Left Toner Collection Unit
Use this SP to set the threshold value of the firmware counter to trigger the full
alert for the left ink collection tank sensor.
[0 to 2147483647/0/1/nl]
Set Threshold for Automatic Print Head Cleaning
2100 TH:ACL:MIST:B Before Capping (Mist Count)
Use this SP to set the threshold value of the mist counter that triggers automatic
print head cleaning before capping at the end of a print job.
[0 to 2147483647/0/1/nl]
2101 TH:ACL:MIST:B During Printing
Use this SP to set the threshold value of the mist counter that triggers automatic
print head cleaning between pages during a print job.
[0 to 2147483647/0/1/nl]
2102 TH:ACL:FEED Before Capping (Paper Dust Count)
Use this SP to set the threshold value of the paper dust counter that triggers
automatic print head cleaning before capping at the end of a print job.
[0 to 65535/0/1/Pages]
2103 TH:ACL:AL:T1H1 Idle Time (1 Hour): Humidity Step 1
2104 TH:ACL:AL:T1H2 Idle Time (1 Hour): Humidity Step 2
To Next Page
Loading...
Need help?
General
